Mirror
How to

The right way to Body a Mirror

Remodel the look a WC by putting in ornamental trim round a plain plate-glass mirror.

Supplies Wanted:

  • 70-1/2″ size 4 1/2″ extensive primed MDF baseboard
  • 70-1/2″ size 3 1/2″ extensive primed MDF baseboard trimmed right down to 1″
  • 70-1/2″ size 3 1/2″ extensive primed MDF baseboard trimmed right down to 1 1/2–”
  • 38-1/2″ lengths 3 1/2″ extensive primed MDF baseboard (2)
  • 63-1/2″ size 3-1/2″ extensive primed MDF baseboard
  • tape measure
  • paneling adhesive
  • extra-strength wooden glue
  • caulk
  • stage
  • latex paint
  • latex paint extender
  • extra-fine sanding pad
  • paintbrush
  • painter’s tape

Step 1: Measure Mirror and Choose Body Fashion
Decide trim model and positioning of trim round mirror to acquire measurements particular to reflect being framed. Use measurements to chop lengths of primed MDF baseboard.

Step 2: Put together Work Space
Collect required supplies. Lay out lengths of trim on flat working floor.

Step 3: Paint Again Sides
Add latex paint extender to color, lengthening drying time and minimizing brush strokes. Paint again facet of trim alongside edges that may prolong over edges of mirror. Let dry two hours.
Tip: The again edges might be mirrored in mirror.

Step 4: Paint Trim
Paint entrance sides and edges of trim. Let dry two hours
Step 5: Sand
Use extra-fine sanding pad to calmly sand surfaces. Wipe clear with tack material.
Step 6: Glue High Body Collectively
Glue three lengths of MDF baseboard forming high body with further power wooden glue. Press items firmly collectively. Let dry two hours.
Step 7: Caulk Joints
Run a bead of caulk alongside seam joints. Easy caulk line and wipe away any extra. Let dry one hour.
Step 8: Apply Contact -Up Paint
Paint over caulk by calmly brushing layer of paint alongside joint.

Step 9: Apply Second Coat of Paint
Paint a second layer of paint over fronts and sides of trim. Let dry 12 hours earlier than set up.

Step 10: Set up High Body
Apply paneling adhesive to space the place high body piece might be positioned.

Step 11: Place and Tape
Press body piece onto adhesive, verify for correct placement and guarantee piece is stage. Safe in place utilizing clean-release tape.

Step 12: Repeat Steps
Repeat prior steps, putting in two facet items of trim adopted by backside piece.

Step 13: Verify Placement and Tape
Verify all joints the place trim meets to make sure items are positioned accurately and sq.. Make any obligatory changes earlier than adhesive begins to dry. Safe in place utilizing clear–launch tape. Let dry 24 hours.

Step 14: Caulk Joints
Run a bead of caulk alongside any gaps at joints. Easy caulk line and take away any extra. Let dry one hour.

Step 15: Apply Contact Up Paint
Paint over caulked joints and any areas of body requiring touch-ups.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *